Archive for July 2018

Tips to avoid water damage

Water damage causes many headaches to property owners. Not only do they destroy their property, but they also push up the bill of their insurances, moreover to avoid them. According to National restoration mold Test Company 40% of claims covered by home insurance policies are associated with water damage. Here are some tips to prevent them.

Small gestures that make all the difference

First, there are certain behaviors to which to pay more attention can make all the difference. Here are a few:

  • Warn your tenants, try as little as possible to let the dishwasher or the washer run when they are away. If a break occurs during their absence, for example, if the hose of the dishwasher breaks, the water will have time to accumulate on the floor and cause damage.
  • Before the cold season starts, make sure your gutters are empty. This will prevent the water already present from overflowing and seeping into your home.
  • Run a test with your submersible pump (a tool for pumping water in the basement) by putting water in the pit in the basement to see if it works properly.
  • Locate the main water valve in the building and in each dwelling. Notify each of your tenants where they are located. In case of overflow, they will know where to go to cut the flow of water.
  • Make sure the caulking of your windows is done properly before the start of the cold season. This will help prevent water infiltration.

Tips for appliances that work with water

Install water bins under the water heaters in your building. Change these in every 10 years as beyond this period, the risks of flight are too great.

Every 10 years as well, be sure to replace the hoses on the back of your washer. When a tenant moves in, make sure the hoses are in good condition.

Installing Secondary Valves

A water damage technician advises having secondary toilet valves installed, as well as all the faucets in the house. This will allow you to reduce the time of intervention during water damage and also to minimize the damage, by cutting the flow more quickly. To give you an idea of ​​the damage caused by water damage, here are the liters of water that can accumulate in your home per minute in the event of an incident.

  • 2 minutes = 40 liters
  • 5 minutes = 100 liters
  • 10 minutes = 200 liters

As you can see, if you do not act quickly, your residence may be flooded, and in time to say it! If you leave for a few days, remember to close the main water valve of your home. This will prevent spills during your absence. If you own rental properties, be sure to close the water valves in the empty homes.

 

Choose your electric cable

Electricity is like water, it needs a pipe to circulate. More fluid is important more you need big pipes to pass the liquid. For electricity it’s a bit like this, the more the power demand is important plus the pipes (here the cable) will have to be big.

The right section according to the good power

At home your installation is 220 or 230 V. it is already a beautiful power with which you should not be mistaken if you realized the electricity yourself. The wire section is measured in mm and can support a given maximum power. If you place a section too small, you risk melting your threads and even the fire. Here are the recommended powers according to the Ceramic wire connectors sections.

  • 5 mm² up to 2300 W (for 10A);
  • 5 mm² up to 3680 W (for 16A);
  • 4 mm² up to 5 750 W (for 25A);
  • 6 mm² up to 7,360 W (for 32A);
  • 10 mm² up to 9 200 W (for 40A);

What section use at home?

The 1.5 mm² should be used to install your led lighting for example:

  • The 2.5 mm² are recommended for the outlets to which you will connect the refrigerator.
  • Beyond 4 mm, you are on powerful loads, like connecting a heater or an electric stove.
  • You can find 1.5 mm² easily on online shopping sites

Current fashion twisted color cable

Because even the son becomes a fashion accessory, it is possible to find the son of section 1.5mm typed old. The design with led luminaries is the most beautiful effect. Here is a selection of “old generation” cable.

The final accessories socket on your cable

The socket comes to finish your cable is allows you to connect the bulb on it. Be careful as the wire sections, the socket has a consumption limit. Generally indicated on it, it is advisable not to exceed the setting under penalty of seeing melt your sleeve. A board place on a led bulb to avoid any problem of overheating. Note that there are also vintage sockets for an even more glamorous finish of your interior.

The domino to connect your son

During the installation you will have to connect 2 or 3 wires together. So you need dominoes. The domino is used to join the wires and to allow the continuity of the passage of the current. It is also important here not to overload the dominoes in order to avoid any electrical problem. Especially since the domino is often hidden in a box and it is not easy later to identify if there is a problem. You have two possibilities for dominoes to screw or automatic.

Strollers: Ideal for transportation and travel in public transport

Strollers are a lightweight option designed for children from 6 months to the age when the baby is already able to walk for long distances (usually up to 3 years). Of course, everything depends on the particular model, but in general, stroller has three main advantages. Strollers in Calgary are much lighter in weight, not so cumbersome in size, and are much easier and more compact than the other strollers.

Idea about Seasonal Strollers

According to the seasonal factor, strollers are divided into winter and summer strollers. Winter models are more massive, with large wheels, a three-dimensional hood for weather protection and a special cover for warming the baby’s legs. The decoration of their body is made of warm material. Summer, in turn, has a smaller size, small wheels, light body fabric and a small protective visor. Most of all they are attracted by weight (an average of 6-11 kg) and mobility.

Type of Folding Strollers

By type of folding strollers are divided into strollers-canes and strollers-books. Carriages-walking sticks are lightest in weight and easily fold along their axis, resembling a folded cane. It is very convenient for them to travel in public transport or to travel. However, it is better to buy them for older children (at least after a year), since the sleeper in such carriages does not have the rigidity that is necessary for the correct formation of the baby’s spine.

Stroller-books are slightly larger in size and weight. They fold in half, the backboard abuts the seat. In general, the model is more reliable, durable and at the same time still quite convenient for transportation.

How to choose a wheelbase stroller

Depending on the configuration of the wheelbase, strollers are four-wheeled and three-wheeled. Four-wheel models are more stable and have good cross-country ability. They are more convenient when driving on rough terrain and stairs.

In turn, three-wheeled carriages provide more maneuverable and quick driving. They are designed for parents who are accustomed to lead an active lifestyle (for example, fast and walk a lot with a stroller). Such strollers feel confident on roads with good coverage. But the areas with irregularities and obstacles many parents have to overcome on one wheel. There is a problem when driving on stairs and gangways for strollers.

Regardless of its kind, strollers are used only when the child has learned to sit unaided, since most of the time the baby spends in them in a sitting or semi-sitting position. At the same time, strollers are very popular today, with their back fully lowered so that the child can not only sit, but also sleep.

Categories
Bookmarks
  • Partner links